1. The 3 keys for a good chromed piece are:
- FLAT Surface
- BRILLIANT surface (Lacquered)
- DRY varnish and fully dried (Very important)
With this we mean the surface has to be very well dried and really hard.
2. Apply a fine layer and several layers of chrome effect (2-3 layers), without applying too much, until the surface is fully covered. Apply with bigger pressure of air, and smaller quantity of product. Apply at 20-22 ºC
3. Dry in the spray booth at 60-80ºC, 45 minutes. approx. Be careful
with the plastic. (For industrial applications, for example tires, dry at
the maximum temperature, 30 min. at 150-200ªC)
Allow to crystallize the product 1 day. If you cannot wait, Allow to cool
at least 2 hours before lacquering.
4. Varnishing:
- With the Fixachrome (Special clearcoat): 1 fine layer, wait 15 min. and
finish it. Let it dry for 45 min.. Then, apply a 2K topcoat.
